Search

The DMW-01 is a walk-behind digital measuring wheel with a 12-inch wheel, backlit LCD readout and a folding/telescoping handle, storing several past r..

A steel oil-dipping/gauging tape wound on a compact reel with a crank handle and a brass plumb-bob weight attached to the tape end. It is used to meas..

The N2020-100M is a 100m open-reel engineering tape with a nylon-coated steel blade for tear and moisture resistance, with a wind-up crank handle for ..

The N2020-30M is a 30m open-reel engineering tape with a nylon-coated steel blade for tear and moisture resistance, with a wind-up crank handle for re..

The N2020-50M is a 50m open-reel engineering tape with a nylon-coated steel blade for tear and moisture resistance, with a wind-up crank handle for re..

The X2020-100M is a 100m open-reel fiberglass long tape with a fast-rewind crank handle, built for lightweight, non-conductive measuring over long dis..

The X2020-50M is a 50m open-reel fiberglass long tape with a fast-rewind crank handle, built for lightweight, non-conductive measuring over long dista..

A replacement measuring wheel for the REED K4010 and R7150 tachometers, used to measure surface speed and length.

A test probe pair (one red, one black) with banana-style spring contacts rather than sharp piercing tips, meant for connecting into banana-jack test p..

Genuine REED replacement measuring wheel adapter for the R7100 tachometer. It converts the tachometer for surface-speed measurement by rolling against..

The REED R8000 is a heavy-duty 12.5 in distance measuring wheel built for job sites and roadway surveys. It features a telescopic handle, ergonomic pi..

The SinoGNSS A300 is a compact, all-in-one GNSS receiver that combines antenna, GNSS module and communication electronics inside a single sealed dome,..

A compact choke-ring GNSS antenna covering GPS, GLONASS, BeiDou, Galileo and SBAS signal bands, with the concentric ring design that suppresses multip..

The AT600 is ComNav's full-performance choke ring GNSS antenna, built around a 3D choke-ring ground plane that rejects multipath signal reflections fo..

This SinoGNSS-branded electric steering wheel is the actuator module of ComNav's autosteer kit, mounting onto the tractor's steering column to physica..

The M300 Pro is a robust reference-station GNSS receiver built for continuously-operating CORS network base stations.

The SinoGNSS/ComNav SAR 5000 is a tripod-mounted, non-contact ground-based radar built for real-time slope and structural displacement monitoring rath..

The TCA930 is a 3D structural choke ring GNSS antenna built for CORS and RTK reference stations, using a multipath-resistant choke plate design to red..