Search

GoSLAM's handheld extension pole lets an operator hold the scanner higher or further out to reach over obstacles, into stairwells, or above crowds whi..

The GEOPOLE is a 100% carbon-fibre 2m rover rod with instant snap-lock extension and a built-in adjustable vial.

The G35001 is a two-leg aluminum support stand for prism poles, GPS/GNSS rover rods, and total-station rods, using a thumb-release clamp on telescopin..

The G35001-A is the aluminum thumb-release bipod platform, sized to clamp thinner invar/precision leveling staffs rather than standard prism poles.

The G35001-B is a purpose-built variant of the aluminum thumb-release bipod for optical leveling staffs, with a narrower clamp range to steady the rod..

The G35002 is a three-leg version of the aluminum thumb-release stand family, built for stabilizing prism poles or GNSS rods in the field, extending t..

The G35004 is a carbon-fiber two-leg thumb-release bipod, built to clamp poles from 15-45mm diameter without needing to thread the pole through the he..

The G35005 is a three-leg carbon-fiber stand sharing the same thumb-release mechanism and extension range as the aluminum tripod, offering lighter fie..

The G51018 is a bubble-level vial mounted in a snap-on holder that clips around a 32mm OD pole, giving a quick visual plumb check on prism or GPS pole..

The G51019 is a die-cast aluminium rod-level clamp with an adjustable 20-minute vial, clipping onto round/rectangular rods for levelling staffs or pri..

The Muya G61001 Rover Rod is 2.2m in length, One-section, Black in colorThese rods are made of high strength carbon fiber, which is more lighter.Twist..

The Muya G61002 Rover Rod is 3.6m in length, Two-section, Black in colorThese rods are made of high strength carbon fiber, which is more lighter.Twist..

The G61006 is a two-piece 100% carbon-fiber rover pole built with dry-wound filament construction for a high strength-to-weight ratio, fitted with a f..

The Muya G61006A GNSS Rover Rod is made of Aluminum Material.These two-piece GNSS rover rods with fixed height at 2 meters.Features fixed 5/8 11 tip a..

The G61007 is a fixed 2-metre carbon-fiber rover rod with a snap-lock/compression-lock mechanism for instant height locking, plus a built-in adjustabl..

The G61009 is a 2m telescoping GNSS rover rod, carbon-fibre/aluminium tube, with a fixed 5/8-11 tip, compression lock plus a secondary snap-lock and a..

The G71007 is a lightweight cut and fill rod with a level vial and cm/mm graduations, used in grading and earthworks to read cut/fill depth directly a..

The G71011 is a 2m telescopic aluminum range rod with a steel pole point and tip, used as a sighting/marking pole in traversing and general survey lay..

The G71012 is a 3m telescopic aluminum range rod with a steel pole point and tip, used as a sighting/marking pole for longer-range traversing and layo..

Replacement hexagonal rod section and pointed steel tip for prism/GPS survey poles, allowing a worn or damaged pole segment and tip to be swapped out.