Search

The SinoGNSS A100 Pro is a compact, palm-sized smart antenna that combines a full-constellation, multi-frequency GNSS module, an integrated gyroscope,..

The SinoGNSS A300 is a compact, all-in-one GNSS receiver that combines antenna, GNSS module and communication electronics inside a single sealed dome,..

The AG501 Pro is ComNav's autosteer kit for precision agriculture, built around the A100 Pro smart antenna that combines a GNSS receiver, gyroscope an..

A compact choke-ring GNSS antenna covering GPS, GLONASS, BeiDou, Galileo and SBAS signal bands, with the concentric ring design that suppresses multip..

A full-constellation, triple-frequency survey antenna that tracks GPS, GLONASS, BeiDou, Galileo, QZSS, IRNSS, SBAS and L-Band signals for precise posi..

The AT600 is ComNav's full-performance choke ring GNSS antenna, built around a 3D choke-ring ground plane that rejects multipath signal reflections fo..

A rechargeable bar-style battery pack used to power a SinoGNSS GNSS receiver in the field.

A pole-clamp holder with adapter for mounting a tablet or field controller onto a survey pole.

The C100 is a reflectorless total station built for coordinate, angle, and traverse survey work with prism-free ranging.

The SinoGNSS TS-C200 is a rugged manual total station built for high-precision land surveying, construction, and civil engineering work. It delivers 2..

The C200 is a higher-end manual total station offering longer range and greater accuracy than the C100.

The SINOPOLE is a two-metre, four-section carbon-fibre GNSS rover rod used to hold a survey antenna/receiver at a fixed height above a survey point.

CDC.NET is ComNav's server-side CORS software for managing large, multi-station regional GNSS reference networks. It ingests raw observation data from..

CDC+ is the NTRIP-caster component of ComNav's CORS platform, distributing real-time base-station corrections over the internet to rover receivers via..

The CDL5 is a three-in-one RX/TX/Repeater UHF external data link with the entire range of 410-470 MHz, designed for GNSS system applications. The high..

The SinoGNSS DS3-SN32 is an automatic (self-levelling) optical level used to establish and check horizontal reference lines during levelling surveys.

The SinoGNSS DS3-SN36 is an automatic (self-levelling) optical level used to establish and check horizontal reference lines during levelling surveys.

The SINDHC dual hard carry case holds two GNSS receiver kits side by side for transport.

The SinoGNSS E300 is a quadcopter mapping drone built around ComNav's K8 RTK/PPK GNSS module, giving centimeter-level photo positioning without ground..