Search

A 32mm clamp-on bubble base sized to match GP220TL/GP250TL telescopic GNSS rover poles, letting the surveyor confirm the rod is plumb before logging a..

The GP250TLD-2C is a 2.5m twist-lock carbon-fibre GPS rover pole, same family as the 2.2m version.

A flat black-and-white checkerboard-pattern paper target used as a reference point for 3D laser scanners, printed at a standard scanning-target size a..

The REED R2330 is a professional infrared thermometer with a 50:1 distance-to-spot ratio, letting users take accurate readings of small targets from f..

The REED R2330-NIST is a higher-temperature infrared thermometer rated to -32C/1250C (-26F/2282F) with a 50:1 distance-to-spot ratio, suited to furnac..

Medium gauge hypodermic needle tip, used to pierce and measure food, rubbers and solids.Features: Measurement range: -58 to 1112°F (-50 to 600°C) Des..

OSHA-referenced data logging heat stress meter that calculates Wet Bulb Globe Temperature (WBGT) from ambient temperature, humidity, and direct/radian..

An OSHA-oriented heat stress meter and data logger that measures Wet Bulb Globe Temperature (WBGT) along with humidity and direct/radiant sunlight to ..

The same OSHA-recommended WBGT heat stress data logger as the standard kit, but expanded with a tripod for stable long-duration outdoor or job-site mo..

The REED R6250SD is a data-logging version of REED's WBGT heat-stress meter, recording air, black-globe, and wet-bulb temperature plus humidity direct..

The REED R7800 is a non-destructive coating thickness gauge that automatically senses ferrous and non-ferrous substrates and measures up to 1250 micro..

Identical hardware to the standard REED R7800 coating thickness gauge (0-1250 micron / 50-mil range, auto ferrous/non-ferrous detection, color LCD wit..

An 8.45 fl oz (250ml) bottle of general-purpose ultrasonic couplant gel formulated for use with ultrasonic thickness gauges on iron, steel, aluminum a..

A case pack of twelve 8.45 fl oz (250ml) applicator bottles of REED's ultrasonic couplant gel, the same slow-drying, water-soluble formula used to cou..

The REED TP-01 is a Type K beaded thermocouple wire probe rated for -40 to 250C (-40 to 482F). It has a roughly 38-inch (96.5 cm) lead wire, color-cod..

A basic beaded-tip Type K wire probe intended for everyday spot-checks with any Type K meter or thermometer, color-coded per ANSI thermocouple convent..