Search

A genuine replacement light sensor with its own protective cover, built as the detachable probe for REED's R8100SD and SD-1128 data-logging light mete..

The R9100 is a handheld ultrasonic leak detector that converts the inaudible high-frequency sound produced by escaping gas, air, vacuum, or fluid at a..

A handheld digital refractometer that reads sugar concentration on a 0-55% Brix scale in about three seconds, useful for checking juices, syrups, sauc..

A handheld indoor air-quality data logger that tracks up to three plug-in probes at once, covering CO, CO2, O2, temperature, humidity, dew point and w..

A plug-in replacement carbon monoxide sensing probe built for the REED R9910SD and SD-9901 air quality data loggers. Swaps in directly when the origin..

A replacement carbon dioxide probe compatible with the REED R9910SD and SD-9901 data logging air quality meters. Lets a technician restore CO2 measure..

The REED R9910SD-KIT is a data-logging indoor air quality meter capable of monitoring three probes at once, covering oxygen, CO2, carbon monoxide, tem..

This data-logging meter tracks up to three indoor air quality parameters at once, covering oxygen, carbon dioxide, carbon monoxide, temperature, and h..

An oxygen-sensing replacement probe made for the REED R9910SD and SD-9901 indoor air quality meters. Designed as a drop-in swap for a depleted or fail..

A combined temperature and humidity replacement probe for the REED R9910SD, SD-9901 and SD-3007 data logging air quality meters. Restores ambient temp..

The REED RINSPECT-KIT bundles the essential tools a home inspector needs in one case: an infrared thermometer, a dual moisture meter, a non-contact vo..

The REED RINSPECT-KIT2 is the deluxe step up from the base inspector kit, adding a circuit breaker finder, a combustible gas leak detector, and a lase..

The REED RINSPECT-KIT3 is the professional-grade inspector bundle, combining the infrared thermometer, receptacle/GFCI tester, dual moisture meter, no..

A North American-standard 110V AC power adapter for REED SD-Series data loggers, stepping 120V mains power down to a regulated 9V DC supply. Fitted wi..

A 24-inch strip of reflective tape meant to be cut into small tabs and applied to a rotating shaft or component so a photo tachometer can pick up a cl..

This heated semiconductor gas sensor detects gasoline, propane, natural gas or fuel oil. For use it with the REED C-383 combustible gas detector.

A higher-capacity version of REED's SD-series force gauge, recording push and pull forces up to 220 lb (100 kg) with the same reversible-display desig..

This is a genuine REED replacement load cell sensor for the SD-6100 Data Logging Force Gauge, intended to restore or replace the force-sensing element..

The REED SD-6100-NIST is the higher-capacity sibling of the SD-6020, measuring push and pull forces up to 100 kg (220 lb) with a 4-digit backlit LCD t..

This digital stopwatch times up to 23 hours, 59 minutes, 59 seconds with 1/100-second resolution and rated accuracy of +/-3 seconds per day, and it ca..