Search

This digital stopwatch times up to 23 hours, 59 minutes, 59 seconds with 1/100-second resolution and rated accuracy of +/-3 seconds per day, and it ca..

The REED SW700 combines a precision stopwatch with a built-in environmental monitor, tracking temperature, humidity, heat index, and dew point alongsi..

The SW700 combines a precision stopwatch with a built-in temperature/humidity sensor that calculates heat index and dew point, helping gauge how condi..

This Automatic Temperature Compensation (ATC) probe connects to the SD-230 pH/ORP Datalogger for increased accuracy.

The SinoGNSS A100 Pro is a compact, palm-sized smart antenna that combines a full-constellation, multi-frequency GNSS module, an integrated gyroscope,..

The C100 is a reflectorless total station built for coordinate, angle, and traverse survey work with prism-free ranging.

The SinoGNSS HYD10 is a portable, IP67-rated single-beam echo sounder weighing about 1.2 kg, using a 200 kHz transducer to measure depths from 0.3 to ..

A palm-sized, wearable multi-constellation GNSS receiver with a built-in antenna, designed to be worn on an armband, helmet or safety vest for personn..

The SinoGNSS XE100 is ComNav's 3D machine-guidance kit for excavators, pairing dual GNSS antennas with boom, stick, bucket and body-mounted inclinomet..

The XE100 is a machine guidance system pairing a GNSS receiver with an in-cab display, mounted on excavators for real-time grading and digging guidanc..

The XP100 static pilling guidance system (sensor configuration 0) helps position piling rigs precisely using GNSS-based guidance.

The XP100 pilling guidance system (sensor configuration 1) is the same piling-guidance hardware with one sensor installed.

The XP100 pilling guidance system (sensor configuration 2) is the same piling-guidance hardware with two sensors installed.

The XP100 pilling guidance system (sensor configuration 3) is the same piling-guidance hardware with three sensors installed.

The XP100 pilling guidance system (sensor configuration 4) is the same piling-guidance hardware with four sensors installed.

The TCA930 is a 3D structural choke ring GNSS antenna built for CORS and RTK reference stations, using a multipath-resistant choke plate design to red..

The TCA920 is a 2D choke-ring GNSS antenna built for base stations and CORS reference setups, tracking GPS, GLONASS, BDS, Galileo, QZSS, SBAS and IRNS..