Search

The REED R9930 is a handheld air particle counter that reports up to six particle size channels down to 0.3 microns, paired with a built-in still/vide..

A replacement 7.4V lithium battery pack sized and rated to match the power requirements of the REED R9930 air particle counter, for restoring runtime ..

A genuine replacement AC power adapter made specifically for the REED R9930 air particle counter, letting the meter run continuously or recharge witho..

33% humidity calibration standard used to check and calibrate the accuracy of compatible REED humidity meters, including the R6001, SD-3007, 8706, R62..

75% humidity calibration standard for verifying and calibrating the same family of REED humidity meters (R6001, SD-3007, 8706, R6200, R9900, R9905, R6..

Two-point humidity calibration kit pairing the 33% (R9933) and 75% (R9975) standards in one package, for verifying humidity meters across their workin..

The REED RINSPECT-KIT bundles the essential tools a home inspector needs in one case: an infrared thermometer, a dual moisture meter, a non-contact vo..

The REED RINSPECT-KIT2 is the deluxe step up from the base inspector kit, adding a circuit breaker finder, a combustible gas leak detector, and a lase..

The REED RINSPECT-KIT3 is the professional-grade inspector bundle, combining the infrared thermometer, receptacle/GFCI tester, dual moisture meter, no..

This heated semiconductor gas sensor detects gasoline, propane, natural gas or fuel oil. For use it with the REED C-383 combustible gas detector.

The SD-230-Kit2 bundles REED's SD-230 data-logging meter with a PE-11 pH electrode and an ORP-14 ORP electrode. It measures pH from 0.00-14.00 and ORP..

This digital stopwatch times up to 23 hours, 59 minutes, 59 seconds with 1/100-second resolution and rated accuracy of +/-3 seconds per day, and it ca..

This digital stopwatch times up to 23 hours, 59 minutes, 59 seconds with 1/100-second resolution and rated accuracy of +/-3 seconds per day, and it ca..

The REED SW700 combines a precision stopwatch with a built-in environmental monitor, tracking temperature, humidity, heat index, and dew point alongsi..

The SW700 combines a precision stopwatch with a built-in temperature/humidity sensor that calculates heat index and dew point, helping gauge how condi..

This Automatic Temperature Compensation (ATC) probe connects to the SD-230 pH/ORP Datalogger for increased accuracy.

The TP-R01 is a genuine Reed Instruments replacement PT100 RTD temperature probe made specifically for the Reed C-370 RTD thermometer. It swaps in dir..

The SinoGNSS A300 is a compact, all-in-one GNSS receiver that combines antenna, GNSS module and communication electronics inside a single sealed dome,..

A compact choke-ring GNSS antenna covering GPS, GLONASS, BeiDou, Galileo and SBAS signal bands, with the concentric ring design that suppresses multip..

A full-constellation, triple-frequency survey antenna that tracks GPS, GLONASS, BeiDou, Galileo, QZSS, IRNSS, SBAS and L-Band signals for precise posi..