Search

The AT600 is ComNav's full-performance choke ring GNSS antenna, built around a 3D choke-ring ground plane that rejects multipath signal reflections fo..

The SinoGNSS DS3-SN32 is an automatic (self-levelling) optical level used to establish and check horizontal reference lines during levelling surveys.

The SinoGNSS DS3-SN36 is an automatic (self-levelling) optical level used to establish and check horizontal reference lines during levelling surveys.

It is mainly aimed at high-precision measurement of construction projects, mines, roads and bridges, etc. Easy to operate, clear imaging, Waterproof f..

The SinoGNSS E300 is a quadcopter mapping drone built around ComNav's K8 RTK/PPK GNSS module, giving centimeter-level photo positioning without ground..

The SinoGNSS E300 with the C50 camera option uses the same RTK/PPK-equipped mapping airframe as the base E300, but is fitted with ComNav's higher-spec..

A single-beam echo sounder console and transducer set up for depth measurement during hydrographic survey work.

LiDAR360 MLS (Mobile/Handheld Laser Scanning) is a point-cloud processing package used to post-process data captured by mobile and backpack scanners s..

A handheld 3D laser scanner from ComNav's SinoGNSS line that uses SLAM-based simultaneous localization and mapping rather than GNSS signals, so it can..

The backpack kit turns the LS300 into a wearable mobile mapping rig for walking surveys outdoors. It's roughly 33x26x16cm, weighs about 2.21kg, uses a..

This roof/vehicle mount kit attaches the LS300 laser scanner to a car for fast mobile scanning of roadside infrastructure and corridors. It measures r..

This mount kit lets the SinoGNSS LS300 3D laser scanner pair with a DJI Matrice 300 drone for aerial LiDAR mapping. It's built from aviation-grade alu..

A Li-ion battery pack for the LS300 laser scanner.

A frame backpack designed to carry the LS300 laser scanner and its accessories.