Search

This calibrator sources and reads 11 thermocouple types (A, B, C, D, E, J, K, N, R, S, T) and 5 RTD types (Pt100, Pt200, Pt500, Pt1000, Cu50), plus DC..

This is the NIST-certified version of REED's R2815 calibrator, sourcing and measuring 11 thermocouple types and 5 RTD types along with DC voltage and ..

The REED R2900 is a benchtop dry block calibrator spanning 91 to 572F (33 to 300C), built for verifying RTDs, thermocouples, and bimetal thermometers...

This is the NIST-certified version of REED's R2900 dry block calibrator, covering the same 91 to 572F (33 to 300C) range for calibrating RTDs, thermoc..

This surface thermocouple probe is designed for flat or convex surface temperature measurements. Exposed ribbon allows for direct contact with surface..

The R2920 is a Type K surface probe with an exposed ribbon contact tip built for fast, direct-contact readings on flat or gently curved surfaces, cove..

This REED R2930 is a Type K right-angle surface thermocouple probe designed to measure temperatures on flat surfaces and inside hard-to-reach areas su..

The R2930 is a 90-degree right-angle version of REED's Type K surface probe, letting the sensor tip contact a flat surface or duct wall while the hand..

Specially designed to measure air or gases in heating and cooling units, ovens and engine exhausts.Features: Measurement range: -58 to 1652°F (-50 to..

The R2940 is a Type K air/gas probe with a perforated stainless-steel shield around the sensing tip, designed to measure moving air and gas streams su..

This Type K immersion thermocouple probe measures temperatures from -50C to 600C (-58F to 1112F) with a response time under 2 seconds. It has a roughl..

The R2950 is a Type K immersion/general-purpose probe intended for dipping into liquids such as water, oils and non-corrosive fluids, with a straight ..

Medium gauge hypodermic needle tip, used to pierce and measure food, rubbers and solids.Features: Measurement range: -58 to 1112°F (-50 to 600°C) Des..

The R2960 is a Type K needle-tip probe with a slim hypodermic-style tip meant to pierce into food, rubber, gels and other soft solids for an internal ..

The R2970 is a bright yellow, spring-loaded pipe-clamp thermocouple probe designed to snap securely onto pipes and tubing up to about 1.4 in in diamet..

A spring-loaded Type K thermocouple probe built to clamp directly onto pipes up to about 1.4 in (35 mm) across, so technicians can log surface tempera..

The R2980 is a Type K air-temperature probe purpose-built for monitoring ovens, refrigerators, and freezers, with a stainless-steel shielded tip that ..

An air-temperature Type K probe purpose-built for ovens, walk-in coolers, and freezers, with a stainless-steel shield around the sensing tip so it rea..

The R2990 is a simple black K-Type adapter that converts a standard mini-connector thermocouple probe into dual shrouded banana-plug inputs, letting i..

The R3000SD-ATC is an Automatic Temperature Compensation probe designed to pair with REED's R3000SD and SD-230 data logging pH/ORP meters, improving r..