Search

The REED R5210 plugs straight into any standard 3-wire outlet to instantly reveal common wiring faults such as open ground, open neutral, reversed hot..

A two-piece REED R5320 kit pairing a wire-tracing transmitter with a handheld receiver, built for locating and testing RJ11/RJ45 and other unpowered c..

A handheld tester that measures cable length (up to roughly 100,000 feet / 30km) and low resistance by sending a pulse down the conductor and calculat..

The same pulse-reflection cable length and resistance tester as the standard R5340 -- up to about 100,000 feet of range, 20 preset plus 8 user-defined..

The REED R5400 AC Line Splitter lets you take an accurate current reading with a standard clamp meter on an appliance's power cord, without having to ..

Capacitance decade box for circuit design and prototyping, letting users dial in a target capacitance from 100pF up to 11.111uF across 5 decade ranges..

The R5408 is a resistance decade box used for prototyping and testing circuits, offering 7 switch-selectable decade ranges spanning roughly 1 ohm up t..

This is the same REED R5408 resistance decade box -- 7 switch-selectable decade ranges from 1 ohm to roughly 11.1 megohms in 1-ohm steps, with slide s..

A compact clamp meter purpose-built for measuring small AC leakage currents, covering roughly 6 microamps up to 100 amps with True RMS accuracy for no..

Identical hardware to the standard R5720 leakage clamp meter -- True RMS AC sensing from microamp to 100A range, a 1.26-inch jaw, low-pass filtering f..

The Reed R5820 is a handheld loop calibrator built for sourcing and measuring 4-20mA signals when servicing two-wire transmitters and loop-powered iso..

This is the NIST-traceable version of Reed's R5820 loop calibrator, delivered with a certificate of calibration for documented accuracy in regulated o..

The REED R5825 is a compact loop calibrator built for sourcing, simulating, and measuring 4-20mA current loops on transmitters, sensors, and valve pos..

The REED R5825-NIST is the same rugged loop calibrator used to source, simulate, and measure 4-20mA current loops, complete with a 24V internal loop s..

The REED R5950 is a clip-on current adapter that converts an ordinary multimeter into an AC/DC clamp meter, offering dual 200A/2000A ranges through a ..

This clamp-style adapter turns any standard multimeter into an AC/DC current probe, offering switchable 200A and 2000A ranges with a zero-adjust dial ..

The REED R6001 is a handheld thermo-hygrometer that reads temperature and relative humidity simultaneously on a dual LCD display, sampling up to 2.5 t..

The REED R6001 is a handheld dual-display thermo-hygrometer that tracks temperature and %RH simultaneously with a fast 2.5-reading-per-second sampling..

The REED R6020 is a compact USB data logger that records temperature and humidity readings for later review on a PC. It covers a temperature range of ..

Compact USB-stick style logger that plugs directly into a computer for setup, then disconnects to record temperature and humidity readings independent..