Search

TRU35 is a high-power, small-size, half-duplex digital radio model which is designed using advanced32-bit cortex M4 microcontroller technology, wirele..

An external radio interconnect cable that links a FOIF GNSS receiver to an external UHF radio and battery for extended-range RTK base station transmis..

GoSLAM's UAV mounting kit attaches a compatible scanner underneath a drone airframe such as the DJI M350 for aerial LiDAR mapping.

The G33501 is a pole point tip, the hardened steel ground-contact point fitted to the base of a survey pole or rover rod.

The G33502 is a 25mm pole point with a removable tip, allowing the ground-contact point to be replaced when worn without discarding the whole pole sec..

A precision aluminium bubble vial assembly (32mm outer diameter) used as a replacement part in a survey instrument's circular level.

The G33506 is an aluminum vial assembly, 38mm outer diameter, a clip-on circular level bubble unit used to check a survey pole is held vertical during..

The G33509 is a 32mm pole point with a removable tip, sized for the larger-diameter pole range, allowing the ground-contact point to be replaced when ..

The G33515 is an aluminum vial assembly combined with a pole locking system, letting the operator both read the level bubble and lock the pole extensi..

The G35001 is a two-leg aluminum support stand for prism poles, GPS/GNSS rover rods, and total-station rods, using a thumb-release clamp on telescopin..

The G35001-A is the aluminum thumb-release bipod platform, sized to clamp thinner invar/precision leveling staffs rather than standard prism poles.

The G35001-B is a purpose-built variant of the aluminum thumb-release bipod for optical leveling staffs, with a narrower clamp range to steady the rod..

The Muya G35001-P Bipod Leg Clip easily attaches to the base of any 32mm O.D. prism or antenna poleThe bipod legs snap into the clip making the system..

The G35002 is a three-leg version of the aluminum thumb-release stand family, built for stabilizing prism poles or GNSS rods in the field, extending t..

The Muya G35003 Aligator tripod features a ball-and-socket head, which makes leveling a bubble easyThe rubberized jaws hold a pole (up to 50.8mm OD) f..

The G35004 is a carbon-fiber two-leg thumb-release bipod, built to clamp poles from 15-45mm diameter without needing to thread the pole through the he..

The G35005 is a three-leg carbon-fiber stand sharing the same thumb-release mechanism and extension range as the aluminum tripod, offering lighter fie..

The G35010 is a compact aluminum two-leg mini bipod scaled for mini prism poles, about 25cm tall, a low-profile support for short-range/close survey s..