Search

The C9FANTC is a GNSS antenna coaxial cable kit with connector adapters and weatherproof heat-shrink sleeves, used to route satellite signal from an e..

A genuine FOIF-branded communication/data cable used to link FOIF surveying instruments such as GNSS receivers and total stations to external devices.

An external radio interconnect cable that links a FOIF GNSS receiver to an external UHF radio and battery for extended-range RTK base station transmis..

The P78PANTC is a coaxial extension cable with threaded connectors used to link the P78 GNSS receiver to an external or vehicle-mounted antenna for im..

Provides 6 ft extension for the R8100 and BS-150 Video Borescope Cameras.

A two-piece transmitter/receiver system for tracing live and de-energized wires, cables, and metallic conductors hidden in walls, floors, ceilings, or..

A handheld tester that measures cable length (up to roughly 100,000 feet / 30km) and low resistance by sending a pulse down the conductor and calculat..

The same pulse-reflection cable length and resistance tester as the standard R5340 -- up to about 100,000 feet of range, 20 preset plus 8 user-defined..

The REED R8085-USB is the replacement USB interface cable used to connect the R8085 noise dosimeter to a PC for data retrieval, working alongside the ..

This camera head attachment extends the REED R8500's reach with a 9.8mm waterproof (IP67) camera on a convenient 20-meter cable reel that straps to yo..

A 3-meter cable extension that lets you push the REED R8500 video inspection camera further into pipes, ducts, or machinery than the standard cable al..

This R8500 camera head pairs a 9mm waterproof (IP67) lens with a 5-meter gooseneck cable that holds its shape for steady one-handed positioning. Four ..

A 20-meter (about 131 ft) replacement push-cable for the REED R9000 HD video pipe inspection system, supplied already wound onto its own metal reel fo..

This 131.2 ft (40 m) extended-length push cable is a factory accessory for the REED R9000 inspection camera system, letting technicians reach much dee..

The REED USB-01 is the dedicated USB interface cable used to connect compatible REED SD-series dataloggers (and the TQ-8800) to a PC for use with REED..

A TNC coaxial antenna cable connecting the G200 receiver to its external GNSS antenna.

A charging plate with cable used to recharge the battery of a SinoGNSS N3/N5-series GNSS receiver from mains power.

A TNC coaxial external GNSS antenna cable for the P8H receiver.

A charging plate with cable used to recharge the battery of a SinoGNSS T300-series GNSS receiver from mains power.