Search

The C100 is a reflectorless total station built for coordinate, angle, and traverse survey work with prism-free ranging.

The C200 is a higher-end manual total station offering longer range and greater accuracy than the C100.

The SINOPOLE is a two-metre, four-section carbon-fibre GNSS rover rod used to hold a survey antenna/receiver at a fixed height above a survey point.

CDC+ is the NTRIP-caster component of ComNav's CORS platform, distributing real-time base-station corrections over the internet to rover receivers via..

CDC.NET is ComNav's server-side CORS software for managing large, multi-station regional GNSS reference networks. It ingests raw observation data from..

The CDL5 is a three-in-one RX/TX/Repeater UHF external data link with the entire range of 410-470 MHz, designed for GNSS system applications. The high..

The SinoGNSS DS3-SN32 is an automatic (self-levelling) optical level used to establish and check horizontal reference lines during levelling surveys.

The SinoGNSS DS3-SN36 is an automatic (self-levelling) optical level used to establish and check horizontal reference lines during levelling surveys.

It is mainly aimed at high-precision measurement of construction projects, mines, roads and bridges, etc. Easy to operate, clear imaging, Waterproof f..

It is mainly aimed at high-precision measurement of construction projects, mines, roads and bridges, etc. Easy to operate, clear imaging, Waterproof f..

The SINDHC dual hard carry case holds two GNSS receiver kits side by side for transport.

The SinoGNSS E300 is a quadcopter mapping drone built around ComNav's K8 RTK/PPK GNSS module, giving centimeter-level photo positioning without ground..

The SinoGNSS E300 with the C50 camera option uses the same RTK/PPK-equipped mapping airframe as the base E300, but is fitted with ComNav's higher-spec..

This SinoGNSS-branded electric steering wheel is the actuator module of ComNav's autosteer kit, mounting onto the tractor's steering column to physica..

A TNC coaxial antenna cable connecting the G200 receiver to its external GNSS antenna.