Search

The TG-72-34L is a 7.4V 3400mAh Li-ion battery pack for the G200 GNSS receiver.

A wall-mount battery charger for the G200 GNSS receiver's battery pack.

The SinoGNSS HYD10 is a portable, IP67-rated single-beam echo sounder weighing about 1.2 kg, using a 200 kHz transducer to measure depths from 0.3 to ..

The SinoGNSS HYD600M is a multi-beam echo sounder used in hydrographic surveying to measure underwater depth across a wide swath in a single pass.

Package Details:1x Comnav Jupiter Base Receiver Set1x G75003 Rotating Tribrach Adapter1x G73007 Tribrach with optical plummet(Leica style), Green1x G2..

The Jupiter Laser RTK is ComNav's high-end multi-sensor GNSS receiver, combining a full-constellation GNSS engine (GPS, BeiDou, GLONASS, Galileo, QZSS..

Package Details:-1x Comnav Jupiter Receiver Set-2x Batteries-1x Charger-1x USB/RS232 Data Cable-1x Power Cable-1x UHF Antennae

This kit pairs the same Jupiter Laser RTK receiver with its internal UHF/GSM modems and a controller, configured specifically as a rover unit for RTK ..

LiDAR360 MLS (Mobile/Handheld Laser Scanning) is a point-cloud processing package used to post-process data captured by mobile and backpack scanners s..

This is the 1-year subscription licence for LiDAR360 MLS, the point-cloud processing package used to post-process data captured by mobile and backpack..

The SinoGNSS H600 is an airborne LiDAR system mounted on a drone or aircraft, used to capture dense, accurate 3D point-cloud data of terrain and struc..

A dual-slot battery charger for LS-series laser scanner battery packs.

A Li-ion handle battery pack for the LS-series laser scanner.

A Li-ion battery pack for the LS-series laser scanner.

A handheld 3D laser scanner from ComNav's SinoGNSS line that uses SLAM-based simultaneous localization and mapping rather than GNSS signals, so it can..

The backpack kit turns the LS300 into a wearable mobile mapping rig for walking surveys outdoors. It's roughly 33x26x16cm, weighs about 2.21kg, uses a..

This roof/vehicle mount kit attaches the LS300 laser scanner to a car for fast mobile scanning of roadside infrastructure and corridors. It measures r..

This mount kit lets the SinoGNSS LS300 3D laser scanner pair with a DJI Matrice 300 drone for aerial LiDAR mapping. It's built from aviation-grade alu..

A Li-ion battery pack for the LS300 laser scanner.